4
Interchange Brands, LLC
Manual Carton Closing Staplers
Model No. SHB100-A
& SHB150-C
Operating Instructions
Loading the Tool
Check Staple Leg Length
1.
Pull pusher back until it stops on pusher pivots then rotate
pusher to position for loading staplers .
2.
Insert 2 strips of the appropriate staples into the magazine
from the back . Let the strips slide forward to the front of the
magazine .
3.
Pull pusher back to upright position and gently let the pusher
slide forward against the staples . Do not let the pusher slide
forward and strike the staples at high speed for this may
deform the staples or damage the tool .
1.
Loosen set screw with 3mm hexagon wrench key .
2.
Turn adjusting rod 180° with a screw driver to the desired
adjustment .
3.
If you want to shoot long leg staples, position the “L” on
the adjusting rod facing up .
4.
If you want to shoot short leg staples, position the “S” on
the adjusting rod facing up .
5.
Tighten set screw .
STAPLE
LENGTHS
ROD
POSITION
2
3 & 4
1
2
1
3
