background image

Interchange Brands 

Operator’s Manual

Models: SHB100-A, 

SHB150-C

(11-10-14)

Made In Taiwan  

DN

Limited One (1) Year Warranty for Staplers

Our products are designed and constructed using the highest standards of both material and workmanship. We 

warrant to the original retail purchaser that their tools will be free from defects in material or workmanship for the 

warranty period of one year.

During the warranty period (which begins on the purchase date), we will repair or replace, at our option and 

expense, any product or part that is defective in materials or workmanship after examination by an Authorized 

Warranty Service Center, subject to the exceptions, exclusions and limitations described below. Any replacement 

product or part will carry a warranty for the balance of the warranty period applicable to the replaced product 

or part. A DATED SALES RECEIPT OR PROOF OF PURCHASE FROM THE ORIGINAL RETAIL PURCHASER IS 

REQUIRED TO MAKE A WARRANTY CLAIM. To make a warranty claim, you must return the product, with proper 

receipt/proof of purchase and return transportation charges prepaid, to us (your dealer) or an Authorized Warranty 

Service Center. We will perform our obligations under this warranty within a reasonable time after approval of the 

warranty claim.

WARRANTY EXCLUSIONS

The following warranty exclusions apply:

1.  Normal wear parts are not covered under this warranty. 

2.  This warranty does not cover parts damaged due to normal wear, misapplication, misuse, accidents,  

improper storage, or damage resulting during shipping.

3.  Products used in production/industrial applications are excluded from this warranty.

4.  Labor charges, maintenance, or loss, damage and repairs resulting from improper operation are not covered 

by this warranty.

GENERAL WARRANTY CONDITIONS

This warranty will be honored, only if:

1.  No evidence of abuse, abnormal conditions, accident, neglect, misuse or improper modifications or storage 

of the product exists; and

2.  No deviations from following recommended operating instructions, specifications, and maintenance  

schedules exist. (Read Operator Manual for use, specifications, and maintenance instructions).

This warranty is the only warranty for the product and we disclaim all other warranties. Any implied warranties 

will be limited in duration to the applicable warranty period specified above. Some states do not allow limitations 

on how long an implied warranty lasts, so the above limitation may not apply to you. Your remedies are solely and 

exclusively as stated above. We shall in no event be liable for incidental, consequential, indirect or special dam-

ages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above 

limitation or exclusion may not apply to you. In no event, whether as a result of a breach of contract, warranty, 

tort (including negligence) or otherwise, shall our liability exceed the price of the product that has given rise to 

the claim or liability. Any liability connected with the use of this product shall terminate upon the expiration of the 

warranty period specified above. No employee or representative of any distributor or dealer is authorized to make 

any change or modification to this warranty.

This warranty gives you specific legal rights, and you may also have other rights, which vary from state to 

state.

Summary of Contents for SHB100-A













Reviews: