5
Interchange Brands, LLC
Pneumatic Carton Closing Staplers
Model No. SAB100-A
& SAB150-C
Operating Instructions
Lubrication and Maintenance
NOTE:
Your tool requires lubrication before you use it
for the first time.
1.
Disconnect the air supply from the tool before lubricating .
2.
Turn the tool so the inlet is facing up and put one drop of
Interchange Tool Oil or 3-in-1 oil into air inlet . Never use
detergent oil or additives . Operate the tool briefly after
adding oil .
3.
Wipe off excessive oil at the exhaust . If in-line oiler is used,
manual lubrication through the air inlet is not required on a
daily basis .
Air Supply and Connections
NOTE:
The following illustration shows the correct mode of connection to the air supply system,
which will increase the efficiency and life of the tool.
■
Oiler: Using an oiler may increase oil circulation through the tool, which may increase the
efficiency and life of the tool . If you use an oiler, it is recommended to check the oil level daily .
■
Filter: Using a filter may help increase the efficiency of the tool and remove liquid impurities that
can rust or wear internal parts of the tool . If you use a filter, it is recommended to check the filter
daily and drain if necessary .
Tool
connects here >
