Ultra SAM4W User Guide V1.3
51
Ver1.3
Gethistory
Expected response:
Tx/Rx Traffic as of today:
TX Bytes: XXXXX
RX Bytes: XXXXX
Note:
If the device is not connected to the 3G/4G network, the statistics cannot be downloaded. The Tx/Rx statistics is
computed for every start of PDP session and is zeroed out if the APN is changed/disconnected.
Setplmn=<OprIdentifier>,<AcT>
Expected response:
+COPS: (1, “Telstra Mobile”, “Telstra”, 50501,2 ……….
Note:
<OprIdentifier> is the Operator Identifier Code (MCC/MNC in numeric format only for operator selection)
i.e. Telstra : 50501
<AcT> is the Access Technology
i.e.
0
:
GSM
2
:
WCDMA
7
:
LTE
SetBand=<Band Index No>
Expected response:
System Mode: XXXX
BAND: xxxx
Note:
Band Index No. can be as the following:
00, Automatic
01, UMTS 3G Only
02, GSM 2G Only
03, Automatic
04, Automatic
05, GSM and UMTS Only
06, LTE Only
07, GSM, UMTS, LTE
08, CDMA, HRPD, GSM, UMTS, LTE
09, CDMA only
0A, HRPD only
0B, Hybrid CDMA/HRPD
0C, CDMA, LTE
0D, HRPD, LTE
0E, CDMA, HRPD, LTE
0F, CDMA, GSM, UMTS
10, CDMA, HRPD, GSM, UMTS
11, UMTS and LTE Only
12, GSM and LTE Only
Note: After doing “SetBand”, please do “CellStatus” and check if the !SELRAT parameter is equal to the sent band index number.
(SELRAT correspond to
SEL
ected
R
adio
A
ccess
T
echnology).
