11
Assigning the System Test Attribute
System Tests is a user code attribute that allows the user to perform
system tests. If the user code does not have this attribute turned
on, the user will not be able to perform phone or sensor tests.
To assign the System Testing to a user:
1.
Enter the programming menus by pressing
9
+ System Master Code.
2.
Press
10
n n
2
where nn is user 00 through 15.
3.
To turn System Testing:
• on, press
2
+
ƒ
.
• off, press
1
+
ƒ
.
4.
‚
+
4
+
ƒ
to exit the programming menus.
S
ETTING
THE
T
IME
AND
D
ATE
Although the installer usually sets the time and date at the time of
installation, the user can change it when necessary. See Appendix
C, “Programming Your System” for more detailed information on
setting this feature.
To set the system time:
1.
Enter the programming menus by pressing
9
+ System Master Code.
2.
Press
00
.
3.
Enter the correct time in 24-hour format (4 digits),
then press
ƒ
.
For example, if the current time is 7:23 a.m.,
press
0723
+
ƒ
.
4.
Press
‚
+
4
+
ƒ
to exit the programming menus.
To set the system date:
1.
Enter the programming menus by pressing
9
+ System Master Code.
2.
Press
01
.
3.
Enter the current date as 6 digits (mm/dd/yy) then press
ƒ
.
4.
Press
‚
+
4
+
ƒ
to exit the programming menus.
A
DJUSTING
S
YSTEM
S
OUNDS
AND
T
OUCHPAD
B
RIGHTNESS
Arming Your System Silently
Use the Silent Arming feature to arm your system without disturb-
ing people throughout the house with arming status beeps. There
are two methods for implementing Silent Arming:
• Silent on Demand (User presses
5
before arming.)
• Arming Always Silent (Silent Arming feature on).
Regardless of the method employed, when Silent Arming is in
effect, no Exit beeps sound.
Note:
Protest beeps will always sound when bypassing a sensor.
Silent Arming on Demand
Pressing
5
before arming silences arming status beeps from
touchpads and interior sirens.
To use Silent Arming on demand:
1.
From any touchpad, press
5
.
2.
Within 4 seconds enter:
2
+ Code
or
3
+ Code.
Arming Always Silent
Turning this feature on in the programming menu means that the
status beeps that come from touchpads and interior speakers while
arming will always be silent. You will not have to enter
5
before
arming, as with Silent Arming on Demand.
See Appendix C, “Programming Your System” for more detailed
information on setting this feature.
To enable Silent Arming:
1.
Enter the programming menus by pressing
9
+ System Master Code.
2.
Press
2
+
1
.
3.
To turn Silent Arming:
• on, press
2
+
ƒ
. No system status beeps will sound
while arming.
• off, press
1
+
ƒ
. System status beeps will sound from
touchpad while arming.
4.
Press
‚
+
4
+
ƒ
to exit the programming menus.
The Touchpad Tamper Feature
The installer can program your system to send a Police
alarm in the case of possible touchpad tampering.
If more than 40 keys are pressed when the system asks for
a code, and those keystrokes are not part of a valid access
code, a siren will sound.
2 4 - H o u r F o r m a t
6 : 0 0 a m
7 : 0 0 a m
8 : 0 0 a m
9 : 0 0 a m
1 0 : 0 0 a m
1 1 : 0 0 a m
0 0 : 0 0
0 1 : 0 0
0 2 : 0 0
0 3 : 0 0
0 4 : 0 0
0 5 : 0 0
=
=
=
=
=
=
M i d n i g h t
1 : 0 0 a m
2 : 0 0 a m
3 : 0 0 a m
4 : 0 0 a m
5 : 0 0 a m
0 6 : 0 0
0 7 : 0 0
0 8 : 0 0
0 9 : 0 0
1 0 : 0 0
1 1 : 0 0
=
=
=
=
=
=
1 2 : 0 0
1 3 : 0 0
1 4 : 0 0
1 5 : 0 0
1 6 : 0 0
1 7 : 0 0
=
=
=
=
=
=
N o o n
1 : 0 0 p m
2 : 0 0 p m
3 : 0 0 p m
4 : 0 0 p m
5 : 0 0 p m
1 8 : 0 0
1 9 : 0 0
2 0 : 0 0
2 1 : 0 0
2 2 : 0 0
2 3 : 5 9
=
=
=
=
=
=
6 : 0 0 p m
7 : 0 0 p m
8 : 0 0 p m
9 : 0 0 p m
1 0 : 0 0 p m
1 1 : 5 9 p m