S3 Recumbent Bike Assembly and Installation Guide
4
2.
Cut plastic film and remove from seat carriage area.
3.
Slide seat back rails into place.
4.
Fasten the seat back using four button head bolts (M8 x 1.25
40mm) and four washers by installing the back bolts first.
5.
Install the front seat back bolts (M8 x 1.25 40mm) with washer.
6.
Slide the seat carriage back and lift and cut the blue film off
slider.
7.
Slide the seat carriage forward and remove the remainder blue
film.
8.
Using Diagonal cutters remove the bands from the support feet.
9.
Using two people remove the bike from the pallet by taking the
front end off pallet first.
Assembled bike
Your bike is now assembled and ready for installation!
