10
INT3000 Cordless Telephone User Guide
Installing The Battery Pack In The Handset
1.
Remove the battery cover by pressing the
latch and sliding the cover down and off of
the Handset.
2.
If replacing a battery, remove the old bat-
tery.
3.
Slide the Battery Pack down into the Hand-
set.
4.
Replace the cover and slide it up until it
latches into the Handset.
Charging the Battery Pack Inside the Handset
When the Battery Pack in the Handset is low and needs to
be charged, you will see a LOW message on the display.
1.
Place the Handset in the front slot of the Battery
Charger.
2.
Make sure the CHARGE indicator lights. If the
CHARGE light is not lit, check to see that the AC
Adapter is plugged in, and that the Handset is making
good contact with the Battery Charger contacts.
Summary of Contents for INT3000
Page 1: ...INT3000 Cordless Telephone User Guide...
Page 2: ......
Page 4: ......
