Inter-Tel INT2000 User Guide
33
MISCELLANEOUS FEATURES
Standard And Alternate Keymaps
Each phone (inlcuding your INT2000) is programmed with a standard key-
map that determines where each feature button appears on the phone. They
can also have an alternate keymap. If you have an alternate keymap, you can
switch between the keymaps by dialing the Switch Keymaps feature code. (If
you have a Switch Keymaps button, you can press it at any time, instead of
following these procedures, to change keymaps.)
To switch between keymaps when your phone is idle:
Dial
3
9
9
.
To switch between keymaps during a call:
While on a call, press the SPCL button and dial
3
9
9
.
Date, Time, Name, and Extension Number
Display
This feature displays the system date and time, user name, and extension
number for approximately five seconds during a call or when other displays
are shown.
To show the date and time display (while on a call, in do-not-disturb, etc.):
Press the SPCL button and dial
3
0
0
.
Hookflash
A timed hookflash (a quick hangup and release) may be required for certain
telephone company services. This feature code sends a timed hookflash over
the outside line when used.
To generate a hookflash while using a line:
Press the SPCL button and dial
3
3
0
.
Summary of Contents for INT2000
