Inter-Tel INT2000 User Guide
6
Low Battery Indicator
When the Battery Pack in the Handset is low and needs to be charged, you will
see a BATT LOW message on the display. If you are on a call, only the TALK
button will operate and the Handset beeps every 3 seconds. In standby mode,
no buttons operate and the Handset beeps every 15 seconds for up to 15 min-
utes.
Complete your call as quickly as possible and return the Handset to the Bat-
tery Charger for charging, or replace the Handset Battery Pack with another
charged Battery Pack.
Installing The Battery Pack In The Handset
1.
Remove the battery cover by
pressing the latch and sliding
the cover down and off of the
Handset.
2.
If replacing a battery, remove
the old battery.
3.
Slide the Battery Pack down
into the Handset.
4.
Replace the cover and slide it
up until it latches into the
Handset.
Charging The Battery Pack Inside The Handset
When the Battery Pack in the Handset is low and needs to be charged, you will
see a BATT LOW message on the display.
1.
Place the Handset in the front
slot of the Battery Charger.
2.
Make sure the CHARGE 1 in-
dicator lights. If the CHARGE
1 light is not lit, check to see
that the AC Adapter is plugged
in, and that the Handset is ma-
king good contact with the Bat-
tery Charger contacts.
Summary of Contents for INT2000
