Inter-Tel CS-5200 Administrator'S Manual Download Page 328

Page: 328 / 392

Page 310

Voice Processing Prompts

INTER-TEL

CS-5200/5400 ADMINISTRATOR GUIDE, ISSUE 1.1

–

August 2005

523

To forward this call to another extension, press 3.

524

To accept this call, press POUND.

525

To refuse this call, press STAR.

526

You have a call from...

527-534

Not used.

535

Please enter the extension number.

536-537

Not used.

538

For system prompt replacement or reinstatement, press 6.

539

Please enter the number of the system prompt.

540

The system prompt has been replaced by the following custom prompt...

541

The original system prompt is...

542

To replace this system prompt with a custom prompt, press 3.

543

...is not a valid system prompt number.

544

To delete the custom prompt and reinstate the system prompt, press 9.

545

To replace this custom prompt with a new custom prompt, press 3.

546

You have no deleted messages.

547

You have one deleted message.

548

...deleted messages.

549

To recover deleted messages, press 2.

550

To recover this message, press 7.

551

Message recovered.

552

To purge this message, press 9.

553

Message purged.

554

To listen to deleted messages, press 1.

555

To recover all messages, press 2.

556

To purge all messages, press 3.

557

...messages recovered.

558

...messages purged.

559

...message recovered.

Table 42.

Voice Prompts: BVM, EM, and VPU (Continued)

PROMPT ID

CONTENT

Summary of Contents for CS-5200









































































































































































































































































































































































































Search results

Summary of Contents for CS-5200

Reviews:

Related manuals for CS-5200

Brands by name

Popular brands

Inter-Tel CS-5200, Administrator'S Manual

Search results

Summary of Contents for CS-5200

Reviews:

Related manuals for CS-5200

Brands by name

Popular brands