manualshive.com logo in svg

Inter-Tel CS-5200, Administrator'S Manual

Share
Download
Inter-Tel CS-5200 Administrator'S Manual Download Page 296

Voice Processing Features

INTER-TEL

® 

CS-5200/5400 ADMINISTRATOR GUIDE, ISSUE 1.1 

–

 August 2005

Page  278

Scheduled Time-based Application Routing (STAR)

For example:

•

The Labor Day entry, with a specific time, comes before the Day/Night entry so that a
different message is played from 10:00 AM to 2:00 PM only.

•

The early time intervals come before the later intervals on Memorial Day.

•

Dec. 25 comes before the range of dates Dec. 24–Jan. 4 so that the special holiday mes-
sage will be played on that day only.

Once a match is found, the application corresponding to the matched entry is invoked. If no
match is found, the application programmed in the “Default Application” field is used.

When programming the days and times, be careful not to overlap. For example, if you place a
date entry for Dec. 25 after a day of the week entry for Monday, and Christmas falls on a Mon-
day, the “Monday” application will be selected instead of the “Dec. 25” application.

Summary of Contents for CS-5200









































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands