Inter-Tel CS-5200 Administrator'S Manual Download Page 272

Page: 272 / 392

System Features

INTER-TEL

CS-5200/5400 ADMINISTRATOR GUIDE, ISSUE 1.1

–

August 2005

Page 254

Using the Audio Diagnostics Feature

Using the Audio Diagnostics Feature

Only endpoints with the Audio Diagnostics feature enabled can use the feature.

To use the Audio Diagnostics feature:

If the endpoint is idle,

while on-hook, enter the Audio Diagnostics feature code (320).

If you are on an active call,

press

then enter the Audio Diagnostics feature

code (320).

The display shows

PLEASE SELECT AUDIO PROBLEM

Do one of the following to select an audio
problem:

EITHER,

Press the desired menu button.

OR,

Enter the two-digit numeric code (01–12)

that corresponds to the audio problem (Refer
to

page 253

The display shows

PLEASE SELECT AUDIO

DIRECTION

Select the direction of the audio problem.

EITHER,

Press the desired menu button.

OR,

Press the dialpad button that corresponds

to one of the following responses:

•

Press

for ONLY I HEAR IT.

•

Press

for ONLY OTHER PARTY.

•

Press

for WE BOTH HEAR IT.

If the Record-A-Call feature is enabled for your endpoint, the display shows

WOULD

YOU LIKE TO RECORD CALL?

If the Record-A-Call feature is available, you
have the option of recording the call.

EITHER

, Press the desired menu button.

, Press the dialpad button that corresponds

to one of the following responses:

•

Press

to record the call.

•

Press

to continue without recording.

Hang up to complete the Audio Diagnostics
feature.

When the Audio Diagnostics selections are
completed, the system generates Alarm 128

NOTE

Only 6-line display endpoints have the menu buttons mentioned in these instruc-
tions. Users who have endpoints with a 2-line display, or no display, must use the
numeric entries to use the Audio Diagnostics feature.

NOTE

If the system cannot accurately record the call, the display shows

CALL CANNOT BE COMPLETED

∞

ENTER TWO DIGIT

AUDIO PROBLEM

STATIC
DELAYED AUDIO

ECHO

OTHER

PLEASE SELECT

AUDIO DIRECTION

ONLY I HEAR IT
ONLY OTHER PARTY

WE BOTH HEAR IT

WOULD YOU LIKE

TO RECORD CALL?

YES
NO

ALARM #128

x12345 AUDIO FRZ

CLEAR ALL ALARMS

CLEAR ALARM

IDLE MENU

Summary of Contents for CS-5200









































































































































































































































































































































































































Search results

Summary of Contents for CS-5200

Reviews:

Related manuals for CS-5200

Brands by name

Popular brands

Inter-Tel CS-5200, Administrator'S Manual

Search results

Summary of Contents for CS-5200

Reviews:

Related manuals for CS-5200

Brands by name

Popular brands