3.2 Remote controller
3.2.1 Keys Instruction
1. Standby key
After 3S long press, the camera will step into standby mode. Long press 3S again, the
camera will initial configuration again and back to HOME position. (Note: If power-on mode
is turned on and Preset 0 is set, and there is no operation within 12s,it will automatically
point to the specified preset position.
2. Camera address selection
Select the camera
address
which wants to be controlled
3. Number key
Set or run 0-9 presets
4,*,# key
Key combination use
5. Focus control key
Auto focus: Enter into auto focus mode.
Manual focus: The camera focus mode is manual
Switch the camera focus mode to manual focus by pressing [focus +] or [focus -] to adjust.
6. Zoom Control key
zoom
＋
:Lens near
zoom
－
:Lens far
7. Set or clear preset key:
Set preset: Set preset key + 0-9 number key:
Clear preset key: Clear preset key + 0-9 number key
8. pan/tilt control key
Press
key :Up
Press
key :Down
Press
key :Left
Press
key: Right
“HOME” key: Return to the middle position or enter into the next level menu
9,BLC control key
Back light ON / OFF: Turn on or off the back light
10. Menu setting
Open or close the OSD menu
Enter / exit the OSD menu or return to the previous menu.
11. Camera IR remote control address setting
【
*
】
+
【＃】
+
【
F1
】
:Camera Address No.1
【
*
】
+
【＃】
+
【
F2
】
:Camera Address No. 2
【
*
】
+
【＃】
+
【
F3
】
:Camera Address No. 3
【
*
】
+
【＃】
+
【
F4
】
:Camera Address No. 4
12. Key combination Functions
1)
【
#
】
+
【
#
】
+
【
#
】
:Clear all presets
2)
【
*
】
+
【
#
】
+
【
6
】
:Restore factory defaults
3)
【
*
】
+
【
#
】
+
【
9
】
:Flip switch
4)
【
*
】
+
【
#
】
+ Auto: Enter into the aging mode
5)
【
*
】
+
【
#
】
+
【
3
】
:Menu set to Chinese
6)
【
*
】
+
【
#
】
+
【
4
】
:Menu set to English
7)
【
*
】
+
【
#
】
+Manual: Restore the default user name,
password, and IP address
8)
【
#
】
+
【
#
】
+
【
0
】
:Switch the video format to 1080P60
