Intellinet 523769, User Manual

Page: 31 / 48

4.3.4.1.2 T
ag
-b
asED
Vlan P
oRT
C
onfiguRaTion
(P
oRT
i
nfo
)
This screen is enabled when the VlAN Type (see 4.3.4.1 above) is set as “Tagging Base,” and
lets you configure the way each port treats incoming frames marked for tag-based VLANs.
PVID: Set the port’s VlAN Id, which is assigned to all untagged frames received on this port.
The limits are 1 – 4095.
Priority: Set VlAN Priority between 0 (the lowest priority) and 7 (the highest priority).
Ingress Filter: Three configurations can be set with these options.
• Non-Member = Forward; Untagged = Forward: This forwards VLAN-tagged frames that aren’t
members of any VlAN in which the port is participating; and forwards all untagged frames.
• Non-Member = Drop; Untagged = Forward: This drops VLAN-tagged frames that aren’t
members of any VlAN in which the port is participating; and forwards all untagged frames.
• Non-Member = Drop; Untagged = Drop: This drops VLAN-tagged frames that aren’t members
of any VlAN in which the port is participating; and drops all untagged frames.
Double Tag: When set to “enable,” the egress frames are double-tagged. When set to “disable,”
the egress frames are not double-tagged.
4.3.4.2 tag-based Info
This sub-menu presents two options for configuring as many as 64 VLANs on the switch .
4.3.4.2.1 T
ag
-b
asED
Vlan T
ablE
VLAN ID:
This displays previously configured VLANs.
Click on a VId number to display the port information of
that VlAN.
Untagging: The port is an untagging port (as defined by
802.1Q) that is participating in the VLAN. In such an
untagged port, the switch will strip off the 802.1Q tag
from incoming and outgoing frames if they are tagged
this way. This is used to send frames to non-802.1Q-
compliant devices.
Tagging: The port is a tagging port (as defined by
802.1Q) and is participating in the VLAN. The switch will
put the VlAN information of the port – including VId and
Priority – into the header of the untagged frames coming
31
CONFIGURATION