7-8
7.7
RIP Configuration
The
RIP Configuration
page allows the user to set the configuration for the system wide
configuration of RIP. The actual RIP configuration is in the RIP Per Interface
Configuration.
RIP:
This field allows the user to Enable or Disable the RIP session. The resulting RIP
session will monitor all network interfaces that are currently available for messages from
other RIP routers.
Supplier Interval:
This field allows the user to enter the Supplier Interval timer in
second. This timer specifies how often RIP sends announcements as a RIP Supplier.
(Default = 30 seconds)
Expire Timeout:
This field allows the user to enter the Expire timer in second. This
timer specifies the expiration time of a route. When a route has not been updated for
more than “expire” period of time, it is removed from the Route Table. This route is
invalidated and remains in the internal RIP Route Table. It will be included in the RIP
announcements to let other routers know the changes.
(Default = 180 seconds)
Summary of Contents for 522205
Page 1: ...User Guide Revision 2 0 ...
Page 32: ...6 21 ...
Page 34: ...6 23 ...
Page 35: ...6 24 ...
