manualshive.com logo in svg

Intellinet 522205, User Manual

Share
Download
Intellinet 522205 User Manual Download Page 15

6-4

6.1.4.1

 

PPP Configuration 

The current release supports multiple PPP sessions per PVC. The PPP configuration in 
the WAN configuration page is for the first PPP session for each PVC. The predefined 
PPP Account Name (Account ID) is “Simple PPP Account 0” for PVC0 and predefined 
PPP Connection Name is “Simple PPP Session 0” for PVC0. For the other PVC X, the 
predefined account name and connection name will be Simple PPP Account X and 
Simple PPP Session X. X is the PVC number from 1 to 7. 

It can support up to total of 16 PPP sessions, and each PVC can support up to 8 PPP 
sessions. The multiple PPP sessions may be configured with any combination over 8 
PVCs. 

For the multiple PPP sessions, please go to PPP Configuration page (Section 6.3).  

Service Name:

 The service name of PPP is required by some ISPs. If the ISP does not 

provide the Service Name, please leave it blank. 

Disconnect Timeout:

 The Disconnect Timeout allows the user to set the specific period 

of time to disconnect from the ISP. The default is 0, which means never disconnect from 
the ISP.  

MRU: 

Maximum Receive Unit indicates the peer of PPP connection the maximum size 

of the PPP information field this device can be received. The default value is 1492 and is 
used in the beginning of the PPP negotiation. In the normal negotiation, the peer will 
accept this MRU and will not send packet with information field larger than this value.

 

 

MTU: 

Maximum Transmission Unit indicates the network stack of any packet is larger 

than this value will be fragmented before the transmission. During the PPP negotiation, 
the peer of the PPP connection will indicates its MRU and will be accepted. The actual 
MTU of the PPP connection will be set to the smaller one of MTU and the peer’s MRU. 
The default is value 1492. 

MSS: 

Maximum Segment Size is the largest size of data that TCP will send in a single IP 

packet. When a connection is established between a LAN client and a host in the WAN 
side, the LAN client and the WAN host will indicate their MSS during the TCP 
connection handshake. The default value is 1432.

 

Automatic Reconnect:

 When it is checked, it will maintain the PPP connection all the 

time. If the ISP shut down the PPP connection, it will automatically reconnect PPP 
session. 

Authentication:

 When 

AUTO

 option is chosen, the PAP mode will run first then CHAP. 

Host name:

 Required by some ISPs. If the ISP does not provide the Host name, please 

leave it blank. 

 

Q1: If the PPP is disconnected after the 

Disconnect Timeout

 and how can I reconnect it? 

A: You have to go to the 

PPP Status 

under 

Admin Privileged

 column, choose the 

correct 

PVC

 and 

Connect

 option, and then click 

Execute

 to restart a new PPP secession. 

 

Summary of Contents for 522205


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands