manualshive.com logo in svg

Intellinet 522205, User Manual

Share
Download
Intellinet 522205 User Manual Download Page 20

6

-9

The Number of PPP Accounts:  

This field displays the total number of PPP Accounts is 

entered. 

 

 

Session Name:

 This field allows the user to enter his/her own session Name to 

distinguish different session for different PPP accounts and different PVCs. 

PVC:

 This field allows the user to choose the specific PVC for PPP session.  

Service Name:

 The service name of PPP is required by some ISPs. If the ISP does not 

provide the Service Name, please leave it blank. 

Disconnect Timeout:

 The Disconnect Timeout allows the user to set the specific period 

of time to disconnect from the ISP. The default is 0, which means never disconnect from 
the ISP.  

MRU: 

Maximum Receive Unit indicates the peer of PPP connection the maximum size 

of the PPP information field this device can be received. The default value is 1492 and is 
used in the beginning of the PPP negotiation. In the normal negotiation, the peer will 
accept this MRU and will not send packet with information field larger than this value.

 

 

MTU: 

Maximum Transmission Unit indicates the network stack of any packet is larger 

than this value will be fragmented before the transmission. During the PPP negotiation, 
the peer of the PPP connection will indicates its MRU and will be accepted. The actual 
MTU of the PPP connection will be set to the smaller one of MTU and the peer’s MRU. 
The default is value 1492. 

Summary of Contents for 522205


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands