manualshive.com logo in svg

Intellinet 522205, User Manual

Share
Download
Intellinet 522205 User Manual Download Page 23

6

-12

 

Session Name:

 This field allows the user to enter his/her own session Name to 

distinguish different NAT session for different interfaces among different PPP sessions 
and different PVCs. 

Interface:

 This field allows the user to choose specific WAN Interface (PVC or PPP 

Session) for NAT Session. 

NAT Session Name Status:  

This table displays at the bottom of this page to show all 

the NAT Session Names with its WAN Interface. 

Number of NAT Configurations:  

This filed displays the total number of NAT Sessions 

Name is entered. 

Click the link 

Go back to NAT Configuration

 to the NAT configuration page. Select 

the 

NAT

 option. Select the Session Name and assign the PC IP address, and choose the 

Add 

action. Click the 

Submit

 button and go to the 

Save Settings

 to save this 

configuration. 

NAT allows only one entry (User IP) per session. 

NAPT allows many entries (User IPs) per session. 

 

Summary of Contents for 522205


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands