Intellijel MIDI 1U Manual Download Page 5

 
 

OVERVIEW 

 

Intellijel’s   MIDI   1U   system   comprises   several   elements,   which   work   together   to   provide   flexible,  
programmable   MIDI-to-CV   conversion   to   your   Eurorack   modules:   The   system   comprises   two  
mandatory   components,   and   one   optional   component:  

MIDI   1U   module  

  -   This   14HP   1U   module   receives   MIDI   from   an   attached,   external   MIDI   input  

connector   (7U   case,   Palette   case,   or   MIDI   IN   Jacks   1U   module),   and   extracts   (by   default)   Pitch,  
Velocity,   Mod,   CC,   Gate,   Trig,   Clock   and   Reset   messages   —   sending   the   proportional   voltages  
to   individual   3.5mm   jacks   for   patching.  

If   desired,   the   CC   and   MOD   jacks   may   be   configured   to   respond   to   either   Channel Aftertouch   or  
High   Resolution   CC,   and   the   Reset   jacks   can   be   configured   as   a   Run   jack,   instead.  

Additionally,   MIDI   1U   features   an   alternate   Dual   Mode,   which   maintains   the   Clock   &   Reset  
functionality,   but   uses   the   other   six   jacks   to   transmit   Pitch,   Velocity   and   Gate   messages   derived  
from   two   separate   MIDI   channels.  

MIDI   input   connector  

  -   the   MIDI   1U   module   does   not   have   its   own   MIDI   input   jack.   This  

enables   you   to   use   the   MIDI/USB   inputs   built-in   to   your   Intellijel   7U   Performance   Case   or  
Palette   Case.   If   you   don’t   own   one   of   these   cases,   you   can   purchase   the   MIDI   IN   Jacks   1U  
module   to   connect   an   external   MIDI   device.  

MIDI   Expander   1U   module  

  -   This   optional   14HP   1U   module   connects   to   the   MIDI   1U   module  

and   adds   an   additional   eight   3.5mm   CV   outputs.   These   outputs   are   fully   programmable   using  
the    

Intellijel   Config  

  app,   and   greatly   expand   MIDI 1U’s   ability   to   control   your   entire   Eurorack  

system.  

NOTE:   This   module   is   not   yet   available.   Upon   its   release,   this   manual   will   be   updated  
accordingly.  

The   MIDI   1U   system   provides   all   the   essentials   to   control   and   sync   your   Eurorack   modular   from  
your   computer,   mobile,   or   hardware   MIDI   device   with   a   minimum   of   fuss.   Several   of   the   module’s  
most   important   features   can   be   changed   using   the   two   front   panel   buttons,   with   full   configuration  
capabilities   offered   via   the    

Intellijel   Config  

  app,   which   is   available   for   both   Mac   and   Windows.   The  

connectivity,   feature   set,   expandability,   and   compact   size   make   the   MIDI   1U   system   ideal   for  
integrating   your   modular   gear   with   the   rest   of   your   rig.  

 

 

 

MIDI   1U   System   Manual 

4  

Summary of Contents for MIDI 1U





























Reviews: