Recon Blockage Plus
™ Operator’s Guide
600890-000075, rev 1.0
Page 21 of 26
3.3 Monitoring manifold variance
In addition to alerting operators to blocked runs or manifolds, Recon Blockage Plus
™ also
monitors the variance between all manifolds on the implement.
The variance of a manifold is a percentage of flow in relation to the flow of the other manifolds
on the implement that are running the same product type.
•
0% variance:
all manifolds have equal flow levels.
•
Positive variance:
manifold has above average flow level.
•
Negative variance:
manifold has below average flow level. May indicate poor product
flow or low product levels.
The variance
for each manifold appears directly below the manifold’s name on the Blockage
screen of the app
. The manifold’s variance is given in real time and will continuously update.
Manifolds that are outside the variance threshold will change from gray to orange. For more
information about the variance threshold, see Section 2.6.
Figure 20: Understanding variance
– manifold view