-12-
Input the master code.
(Default: [ ]+[#] )
Inputting of code (ex.: 2011)
1~12 digits
Inputting of code (ex.: 2012)
1~12 digits
19.Set the code for
user group 1
20.Set the code for
user group 2
18.Temporary(single use
only) password for relay2
Input the setting code.
Input the setting code.
17.Temporary(single use
only) password for relay1
18+#
19+#
21+#
60+#
2011+#
Inputting of value (ex.: 1006)
1~12 digits
1006+#
Inputting of code (ex.: 2016)
1~12 digits
2016+#
2012+#
Input the setting code.
(ex.:21)
Input the setting code.
(ex.:60)
20~59
60~99
- Once input the correct temporary password to release the door,
the system will clear the temporary password after 60 seconds
automatically. But the password is still valid within 60 seconds after
inputing the correct temporary password
.
- The temporary1 is used to release the first lock,and the temporary
2 is used to release the second lock(the second lock need external
device to support).
- If the password exceeds 12 digits, the system will make the sound
of “beep,beep,beep,beep”,and the digitals you input before will be
cleared at the same time.
- The temporary code can not be set the same as the master code
and user code.
- The user code group1 is used to release the first lock,and the user code
group2 is used to release the second lock(the second lock need external
device to support).
- The user code group1 and user code code group2 can contain 40
group passwords
- If the password exceeds 12 digits, the system will make the sound of
“beep,beep,beep,beep”,and the digitals you input before will be cleared
at the same time.
- The user code can not be set the same as the master code and
temporary code.
Beep+, Beep
(on)
(off)
(off)
LED1
LED2
LED3
Beep+, Beep
(flash)
(off)
(off)
LED1 LED2 LED3
Beep+, Beep
(flash)
(off)
(off)
LED1 LED2 LED3
Beep+
(on)
(off)
(off)
LED1 LED2 LED3
Beep+
(on)
(off)
(off)
LED1 LED2 LED3
Beep+, Beep
(flash)
(off)
(off)
LED1 LED2 LED3
Beep+
(on)
(off)
(off)
LED1 LED2 LED3
Beep+, Beep
(flash)
(off)
(off)
LED1 LED2 LED3
Beep+
(on)
(off)
(off)
LED1 LED2 LED3
-
When the “ cancel” key is pressed, the indicator will show its standby color,
the buzzer beeps, and the system exits the setting mode.
-
When there isn’t any operation within 10s, the indicator will show its standby color,
the buzzer beeps, and the system exits the setting mode.
Beep, Beep+
*
(off)
(off)
(off)
LED1 LED2 LED3
