55
OPERATING THE ACU
12. Set the
WRS DETECT LEVEL
(Range : 10 - 5,000)
The WRS level is to set the WRS detection level.
Press the LEFT and RIGHT arrow keys until the desired character is underscored
(selected). Press the UP and DOWN arrow keys to increase and decrease the
selected character. Or press the NUMBER keys to set the desired value directly.
Press the OK key to set the new
WRS DETECT LEVEL.
13. Set the
VOLT THRES.
The voltage threshold is to distinguish the voltage between 13V and 18V.
Press the LEFT and RIGHT arrow keys until the desired character is underscored
(selected). Press the UP and DOWN arrow keys to increase and decrease the
selected character. Or press the NUMBER keys to set the desired value directly.
Press the OK key to set the new
VOLT THRES.
14. Set the
OFFSET DIFF.
(Range :
±
100 )
The offset difference is to offset the signal difference between RHCP and LHCP.
Press the LEFT and RIGHT arrow keys until the desired character is underscored
(selected). Press the UP and DOWN arrow keys to increase and decrease the
selected character. Or press the NUMBER keys to set the desired value directly.
Press the OK key to set the new
OFFSET DIFF.
W R S D E T E C T L E V E L
V O L T T H R E S .
0 3 0 0
0 6 5 0
W R S D E T E C T L E V E L
V O L T T H R E S .
0 3 0 0
0 6 5 0
O F F S E T D I F F .
U S E W R S
- 0 4 0
Y E S
