t110W/t130W – Marine Satellite Television System
42
6. Set the current
LONGITUDE.
Press the LEFT and RIGHT arrow keys until the desired character is underscored
(selected). Press the UP and DOWN arrow keys to increase or decrease the value.
Or press the NUMBER keys to set the desired value directly.
Press the OK key to set the
LONGITUDE.
7. Set the ship's current
HEADING.
Entry of ships heading is not required when your system is connected to a NMEA0813
or 1:1 Synchro Heading Gyro Compass output.
Press the LEFT and RIGHT arrow keys until the desired character is underscored
(selected). Press the UP and DOWN arrow keys to increase or decrease the value.
Or press the NUMBER keys to set the desired value directly.
Press the OK key to set the
HEADING.
8. Set the
GYRO TYPE.
Determine the type of gyro compass that is used on the ship. Ensure that the Gyro
Type is set correctly. Press the UP and DOWN arrow keys to select the gyro type
and press the OK key to set the
GYRO TYPE.
9. Set the
BOW ADJUST.
The radome should be positioned with the BOW marker aligned as close as possible
to the centerline of the ship. Small variations from actual alignment can be
compensated with the BOW ADJUST, so precise alignment is not required.
Press the LEFT and RIGHT arrow keys until the desired character is underscored
(selected). Press the UP and DOWN arrow keys to increase or decrease the value.
Or press the NUMBER keys to set the desired value directly.
Press the OK key to set the
BOW ADJUST.
L A T I T U D E
L O N G T I T U D E
H E A D I N G
4 1 . 5 0 N
0 8 7 .
3
7 W
0 0 0 . 0
G Y R O T Y P E
B O W A D J U S T
N O N E
0 0 0
L A T I T U D E
L O N G T I T U D E
H E A D I N G
4 1 . 5 0 N
0 8 7 .
3
7 W
0 0 0 . 0
G Y R O T Y P E
B O W A D J U S T
N O N E
0 0 0