29
INSTALLING THE ACU
Connecting the System's Cables
Up to 4 Receivers Connection
In Universal LNB mode, RF1, RF2, RF3 and RF4 can be connected, however,
when you switch and use the system from universal LNB mode (ex. Europe) to
single LNB mode (ex. US), RF3 and RF4 will not work and only RF1 and RF2 will
transfer the satellite's signal.
•
Connect the RF cable from the ACU's RF1 connector on the power switch
box located inside of the radome to the ANT. RF1 connector on the rear of the
ACU.
•
Connect the RF cable from the RECEIVER's connector on the rear of the ACU
to the RF on the IRD.
•
Connect the ship’s gyro cable from the ship’s gyro to the Ship’s Gyro
connector on the ACU.
•
Connect the power cable from the AC power connector on the rear of the
ACU to a power source at 110- 220 V AC.
•
Press the POWER ON switch on the rear of the ACU to start the operation of
the antenna system.
Figure 26. Up to 4 Receivers Configuration
Ship’s Gyro
(Optional)
(Optional)
(Optional)
IRD1 (Not Supplied)
TV (Not Supplied)
IRD4 (Not Supplied)
IRD3 (Not Supplied)
IRD2 (Not Supplied)
NMEA GPS
PC Cable
NMEA
NMEA in NMEA out
Step by Step
Gyro-Compass Input
GPS
Synchro
