17
Installing the ACU
•
The ACU should be installed using the two supplied Table Mounting
Brackets which allow for a top or bottom mounting configuration.
•
Using the self tapping screws supplied, attach the mounting
brackets to the sides of the ACU.
•
Place the ACU in the location where it is going to be installed.
•
Using a pencil to mark the 4 hole positions (2 each side), and use
the appropriate drill bit to drill them.
•
Connect the cables to the rear of the ACU.
Figure 13 : Installation of ACU
Selection of ACU Installation Site
The ACU should be installed below deck, in a location that is:
•
Dry, cool, and ventilated.
•
Easy accessible from your main TV viewing area.
Installing the ACU
Figure 12 : Dimension of ACU for i9P
ACU Dimensions
7.5 cm (2.95”)
17.8 cm (7”)
17.8cm (7”)
5.4cm (2.1”)
22.8cm(9”)
18.5cm (7.3”)
21.7cm(8.5”)
