39
1. Press YES to enter setup mode.
2. Press NEXT six times to enter the Use DiSEqC
1.2 menu.
3. Press YES to
set the use of DiSEqC 1.2.
SETUP MODE ?
SET SAT PAIR ?
USE DISEQC 1.2 ?
YES
PREV
PREV
NO
NEXT
NEXT
YES
YES
X6
Setting the Use of DiSEqC 1.2
If DiSEqC 1.2 protocol is in use on your IRD, enable the DiSEqC 1.2 setting on the ACU to
process the DiSEqC 1.2 command.
4. Set the USE DiSEqC 1.2 to a desired option*
.
PREV - Shows previous option (YES/NO)
SELECT/ENTER - Set the displayed option for
DiSEqC 1.2.
NEXT - Shows next option (YES/NO)
Press ENTER to move to next screen.
5. Press YES to accept the data.
Press NO to cancel and return to main setup
mode.
USE DISEQC 1.2 : NO
NEXT
PREV
SELECT
SAVE ?
YES
NO
Options for ‘USE DiSEqC 1.2’
YES - Select this option if the DiSEqC 1.2 is used.
NO - Select this option if the DiSEqC 1.2 is not used.
