DIGI-88FS Installation Guide
19
Web GUI
To access the web browser GUI, type the DIGI-88FS’s IP address into the address bar of any browser. If a Security Alert dialog
box appears, accept the certificate. The welcome screen will appear.
The DIGI-88FS’s default IP address is:
http://192.168.0.178
The default GUI username and password are:
Username:
administrator
Password:
password
Note: The DIGI-88FS username supports lower case letters only.
The web GUI menu is at the top of every screen for easy navigation of the
interface.
Connection:
Set AV routes and enable/disable video, audio, CEC and OSD
functions per output.
Setup:
Define IP and RS232 settings, rename inputs and outputs,
configure input EDID modes, and set scaled output resolutions.
System:
Upload firmware updates.
Profile:
Select and rename profiles (presets).
User Mgmt:
Create new users and change passwords.
Logout:
Logs out of the web browser GUI.
Video:
Turns off and on audio and video for the corresponding output.
Audio:
Turns off and on audio for the corresponding output.
CEC:
The DIGI-88FS will pass CEC commands from the display to the
source when this feature is enabled. This feature is disabled by default.
OSD:
When an input is routed to an output, the matrix will overlay the
output to input route in the top left corner of the display. The on-
screen display option is enabled by default.
To set routes for inputs to outputs, click the radio button for the route.
Press
Submit
for the changes to be applied to the matrix.
Profiles may also be saved or loaded from this screen. To load a profile,
select it from the dropdown on the top left of the page and press
Load
.
To save a profile, set the route, select the profile to save from the
dropdown, then press
Save
.
See page 20 (
Port Name) to change input and output names and
page
22 (
Profile > Name) to change profile names.
GUI Menu
Connection Sub-Menu
Status
Output Audio Adjust
Summary of Contents for DIGI-88FS
Page 2: ......
