DIGI-88FS Installation Guide
16
Front Panel Menu
After the front panel is unlocked, pressing the
MENU
button will enter the menu system. The options available on
screen will be matched to corresponding lit INPUT LEDs.
Press the MENU button to exit out of the selected option or to return to the routing screen.
The current IP settings of the matrix are viewable in this screen. The web GUI must be accessed in order to change
the IP settings of the DIGI-88FS. Please see page XX for more information.
EDID settings, CEC on or off, on-screen display (OSD) settings, and video output on or off options are available from
this menu.
Below are the input EDID options.
1.
Default - The default EDID (720p/60 with 2 channel PCM audio) is passed to all video sources.
2.
Port 1 - The EDID from output port 1 is passed to all video sources.
3.
Remix - Uses the EDID of each connected display according to its connection when the DIGI-88FS is first
powered on, or immediately after pressing 3 to select the remix option.
4.
Customized - Automatically retrieves and saves the EDID settings of a connected display to an input source.
This can be customized in the web GUI. See page XX for more information.
The current baud rate of the matrix is viewable on this screen. Press INPUT 1 to access and set the other baud
rates. Available options are:
1.
9600
2.
19200 (default)
3.
38400
4.
115200
IP Setting
Operation Mode
EDID Mode
Serial Port Setting
The DIGI-88FS will pass CEC commands from the display to the source when this feature is enabled. This feature
is disabled by default.
CEC
Summary of Contents for DIGI-88FS
Page 2: ......
