DIGI-88FS Installation Guide
11
Connect Sources
Connect Displays
Connect the source devices to HDMI inputs using HDMI cables that
are less than or equal to 5 meters in length. For source devices that
are further away, an HDMI extension device will be required to
complete the connection.
Connect the display devices to HDMI outputs using HDMI cables
that are less than or equal to 5 meters in length. For display devices
that are further away, an HDMI extension device will be required to
complete the connection.
Connect Control
Insert the TRS 3.5 mm plug of the IR receiver to the matrix IR input
port (IR EYE) of the matrix.
When IR control of the DIGI-88FS is necessary, the
IR EYE
input allows the IR remote to control the matrix via the
supplied IR receiver.
IR Control
Summary of Contents for DIGI-88FS
Page 2: ......
