DIGI-88FS Installation Guide
10
Installation Instructions
Quick Start
Rack mount the Matrix
1.
Rack mount the matrix (optional)
2.
Connect ground (optional)
3.
Connect sources
4.
Connect displays
5.
Connect control (optional)
6.
Apply power
At least 2 inches of free air space is required on both sides of the DIGI-88FS for proper side ventilation. Avoid
mounting the DIGI-88FS near a power amplifier or any other source of significant heat.
Remove the supplied shelf feet from the bottom of the matrix.
Then, remove the screw that secures the front panel to the side of
the matrix chassis.
Attach the supplied rack ears to the sides of the DIGI-88FS matrix.
The matrix requires one rack units (1 RU) of space. It is recommended
that you leave an empty rack space above and below the DIGI-88FS
for additional cooling.
Connect Ground
A ground screw is located on the left rear of the matrix to help eliminate static shock during installation and
operation of the matrix. Connect a wire from the matrix to an earth ground, such as a grounded bus bar in an
equipment rack.
Summary of Contents for DIGI-88FS
Page 2: ......
