Intelimax LITE User Manual
V1.02
- 20 -
IP Stack Manual Mode
With IP Stack manual mode, the modem doesn’t initiate the PPP connection. The
modem will rely on the host on serial port to send the PPP initiation commands.
The AT command to Start the PPP session and open a socket is AT$$IPCTOP and
AT$$IPCTOS. The AT command to close the socket and PPP session is AT$$IPCTCS and
AT$$IPCTCP.
The Intelimaxlite supports standard $$ commands for IP Stack Manual connections
which are detailed in the section “Extended / Intelimax LITE Specific AT Command Set”.
WAN page allows configuring the following features:
Operation mode: Serial Modem, IP Stack Auto or IP Stack manual mode
APN and dialup string
Username and password for IP WAN
Auto pin settings (Intelimax LITE will enter the PIN code if SIM pin is Enabled)
network authentication information
Band
– At least one GSM band and one WCDMA band must be selected
Periodic reset
o
TCP Server Listening – if checked will wait until client drops connection
o
TCP Connection State – if checked will wait until Intelimaxlite client drops
connection to a server or server drops connection
Invalid PPP password characters list:
“(double quotation mark)
‘(quotation mark)
?(question mark)
)(bracket)
@(at sign)
;(semi colon)
|(pipe sign)
I(upper case I)
