Intelimax LITE User Manual
V1.02
- 50 -
Getting S0 value in serial modem mode
Please use ATS0? Command to get the S0 value. AT&V command will give you
incorrect S0 Value:
ATS0=2
OK
ATS0?
2
OK
Single SMS AT command
AT+MMC SMSMO <Phone number> <message><CR>
Example: AT+MMC SMSMO 0400123456 Boiler Temperature To High!<CR>
Maximum length of message is 160 characters.
Some characters are not supported: \, [, ], ^, ~, `
Prepare modem for hard shutdown
AT$$RTD
This function is highly recommended when using the modem with an external
controlled power supply. If the modem is going to have its power dropped regularly this
AT command allows for the processor to perform housekeeping duties to ensure that
the shutdown process does not damage the modem or internal cellular module.
at$$rtd
OK
