Intel
®
Xeon
®
Processor C5500/C3500 Series and LGA1366 Socket
August 2010
Thermal/Mechanical Design Guide
Order Number: 323107-002US
31
LGA1366 Socket and ILM Electrical, Mechanical and Environmental Specifications
5
LGA1366 Socket and ILM
Electrical, Mechanical and
Environmental Specifications
This chapter describes the electrical, mechanical and environmental specifications for
the LGA1366 socket and the Independent Loading Mechanism.
5.1
Component Mass
Notes:
1.
Preliminary guidance.
5.2
Package/Socket Stackup Height
provides the stackup height of a processor in the 1366-land LGA package and
LGA1366 socket with the ILM closed and the processor fully seated in the socket.
Notes:
1.
This data is provided for information only, and should be derived from: (a) the height of the socket seating
plane above the motherboard after reflow, given in
, (b) the height of the package, from the
package seating plane to the top of the IHS, and accounting for its nominal variation and tolerances that
are given in the corresponding processor Datasheet.
2.
This value is a RSS calculation.
5.3
Socket Maximum Temperature
The power dissipated within the socket is a function of the current at the pin level and
the effective pin resistance. To ensure socket long term reliability, Intel defines socket
maximum temperature using a via on the underside of the motherboard. Exceeding the
temperature guidance may result in socket body deformation, or increases in thermal
and electrical resistance which can cause a thermal runaway and eventual electrical
failure. The guidance for socket maximum temperature is listed below:
• Via temperature under socket < 96 °C
The specific via used for temperature measurement is located on the bottom of the
motherboard between pins AY23, AY22, AW23, and AW22. See
.
Table 5-1.
Socket Component Mass
Component
Mass
Socket body, contacts, and PnP cover
15 gm
ILM cover
43 gm
ILM back plate for dual processor server products
100 gm
Table 5-2.
1366-land Package and LGA1366 Socket Stackup Height
Integrated stackup height
(mm)
From top of board to top of IHS
7.729 ± 0.282 mm