manualshive.com logo in svg

Intel X3350 - Xeon 2.66 Ghz 12M L2 Cache 1333MHz FSB LGA775 Quad-Core Processor, Design Manual

Share
Download
Intel X3350 - Xeon 2.66 Ghz 12M L2 Cache 1333MHz FSB LGA775 Quad-Core Processor Design Manual Download Page 22

Intel

®

 Xeon

®

 Processor C5500/C3500 Series and LGA1366 Socket 

August 2010

Thermal/Mechanical Design Guide

Order Number: 323107-002US

22

 

LGA1366 Socket

3.3.3

Contacts

Base material for the contacts is high strength copper alloy. 

For the area on socket contacts where processor lands will mate, there is a 0.381 

μ

m 

[15 

μ

inches] minimum gold plating over 1.27 

μ

m [50 

μ

inches] minimum nickel 

underplate. 

No contamination by solder in the contact area is allowed during solder reflow.

3.3.4

Pick and Place Cover

The cover provides a planar surface for vacuum pick up used to place components in 
the Surface Mount Technology (SMT) manufacturing line. The cover remains on the 
socket during reflow to help prevent contamination during reflow. The cover can 
withstand 260° C for 40 seconds (typical reflow/rework profile) and the conditions 
listed in 

Section 6

 without degrading.

As indicated in 

Figure 3-5

, the cover remains on the socket during ILM installation, and 

should remain on whenever possible to help prevent damage to the socket contacts. 

Cover retention must be sufficient to support the socket weight during lifting, 
translation, and placement (board manufacturing), and during board and system 
shipping and handling. 

The covers are designed to be interchangeable between socket suppliers. As indicated 
in 

Figure 3-5

, a Pin1 indicator on the cover provides a visual reference for proper 

orientation with the socket.

Figure 3-5. Pick and Place Cover

 

Summary of Contents for X3350 - Xeon 2.66 Ghz 12M L2 Cache 1333MHz FSB LGA775 Quad-Core Processor






























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands