21
x
Subnet mask
x
Gateway
It is not possible to change these addresses from within the web Interface.
If you want to change the IP address settings of an Access Point already
configured with correct IP address settings, run the KickStart utility and
change the settings manually.
Troubleshooting
If KickStart does not find the Access Point you are
looking for
There are several possible causes depending on the way the Access Point is
connected to the network.
Power supply connector
Wireless
Activity
Power Wired
Link
Reset button
pinhole
Ethernet
connection
Troubleshooting the wireless connection of an Access Point
Possible cause
Solution
Is the Access Point
powered and
connected to the
network?
Verify that the power cord is properly connected.
Verify that the network connection is reliable.
Is the Access Point is
in range of the wireless
Ethernet card on your
client computer?
Check the radio signal LED.
See Specifications to check for possible problems
with respect to range.
