Intel VIA K8T800 User Manual Download Page 48

Page: 48 / 92

BIOS

Page 4-14

Onchip USB Controller

Enables the USB controller.
Options: Enabled, Disabled.

Onchip EHCI Controller

Enables the EHCI (USB2.0) controller.
Options: Enabled, Disabled.

USB Keyboard Support

Enable/disable support for USB keyboard under DOS.
Options: Enabled, Disabled.

USB Mouse Support

Enable/disable support for USB mouse under DOS.
Options: Enabled, Disabled.

Super IO Device

Scroll to Super IO Deivce and press <Enter>. The following screen appears:

Onboard FDC Controller

Select Enabled if you wish to use onboard floppy disk controller (FDC). If you
install an external FDC or the system has no floppy drive, select Disabled in this
field.
Options: Enabled, Disabled.

Onboard Serial Port 1/2

Select an address and corresponding interrupt for the first and second serial ports.
Options: 3F8/IRQ4, 2E8/IRQ3, 3E8/IRQ4, 2F8/IRQ3, Disabled, Auto.

Summary of Contents for VIA K8T800





























































































Search results

Summary of Contents for VIA K8T800

Reviews:

Related manuals for VIA K8T800

Brands by name

Popular brands

Intel VIA K8T800, User Manual

Search results

Summary of Contents for VIA K8T800

Reviews:

Related manuals for VIA K8T800

Brands by name

Popular brands