Intel VIA K8T800, User Manual

Page: 24 / 92

Installation
Page 3-8
DIMM Module Installation
Figure 11 displays the notch on the DDR DIMM memory module.
DIMMs have 184 pins and one notch that matches with the DDR DIMM socket.
DIMM modules are installed by placing the chip firmly into the socket and
pressing straight down as shown in figure 12 until the white clips close and the
module fits tightly into the DIMM socket (figure 13).
Figure 11 - DIMM notch
Figure 13 - DIMM module clip after installation
To remove the DIMM module press down the white clips and the module is ejected
from the socket.
Figure 12 - DIMM module clips before installation
CENTER KEY ZONE
(2.5 V DRAM)