manualshive.com logo in svg

Intel SRPM8, Quick Start Manual, Page: 3 / 32

Share
Download
Intel SRPM8 Quick Start Manual Download Page 3

SRPM8 Server System Quick Start Guide  3

Contents

Server Specifications............................................................................................................ 5
Select Site ............................................................................................................................ 6
Optional Slide Rail Kit........................................................................................................... 7

Equipment Rack Precautions....................................................................................... 7
Prepare the Slide Assemblies ...................................................................................... 8
Attach the Rail Slide Rail Brackets to the Equipment Rack........................................ 10
Attach the Center Bar and Large Outer Bar Assemblies to the Equipment Rack ....... 11
Install the Server in the Rack ..................................................................................... 12

Check Power Cord ............................................................................................................. 13

Power Cord Requirements......................................................................................... 13

Connect Monitor, Keyboard, Mouse ................................................................................... 14
Turn on Video Monitor and Server...................................................................................... 16
Run Power-on Self Test ..................................................................................................... 18
Boot from CD ..................................................................................................................... 19

Change Boot Device Priority ...................................................................................... 20

The Server Product Guide.................................................................................................. 20

Using the Acrobat .PDF Files..................................................................................... 20

Copy Configuration Software to Diskettes .......................................................................... 21
Warnings ............................................................................................................................ 22

WARNING:  English (US) .......................................................................................... 23
AVERTISSEMENT:  Français .................................................................................... 25
WARNUNG:  Deutsch................................................................................................ 27
AVVERTENZA:  Italiano ............................................................................................ 29
ADVERTENCIAS:  Español ....................................................................................... 31

Summary of Contents for SRPM8

































Reviews:

No comments