86
Intel
®
Server System SR2600UR/SR2625UR Service Guide
Figure 75. Installing Tape Drive Assembly into the Server System
4. Connect the 4-pin tape power cable to the tape drive.
5. Connect the other end of the power cable to the power connector on the back side of
the backplane.
6. SATA Tape Drive Mounting Kit comes with a power cable and two SATA
cables.Cabling for the tape drive varies depending on which midplane you have in
your system.
Depending on the midplane installed in your system, do one of the following:
•
If you have an
active midplane
in your system, do the following:
a. Install one end of the short SATA cable to the SATA connector on the backplane.
b. Install the other end of the short SATA cable to the SATA connector on the
tape drive.
•
If you have a
passive midplane
in your system, do the following:
a. Connect the one end of the long SATA cable to the SAS/SATA connector on the
server board or SAS/SATA add-in PCI card.
b. Install the other end of the long SATA cable to the tape drive and route the cable
through the air baffle.
AF000033
Summary of Contents for SR2600URLX
