Intel SR1695GPRX, Service Manual

Page: 72 / 174

RMM3 LITE
Connector
RMM3 LITE
52 Intel
®
Server System SR1695GPRX Service Guide
Installing and Removing the RMM3 Lite
Installing the RMM3 Lite
1. Remove the PCI riser assembly. For instructions, see “Replacing a PCIe* Riser
Card” .
2. Position the RMM3 Lite over the server board RMM3 Lite connector (J2D1) as
shown in Figure 35 .
Figure 35. Installing the RMM3 Lite to the Server System
3. Install the PCI riser assembly into the server system. For instructions, see
“Installing a PCIe* Riser Card” .
Removing the RMM3 Lite
1. Remove the PCI riser assembly. For instructions, see “Replacing a PCIe* Riser
Card” .
2. Disconnect the RMM3 Lite from the server board RMM3 Lite connector (J2D1) as
shown in Figure 36 .