Cables and Connectors
SPSH4 Server System External Product Specification
Revision
1.11
50
5.3.11
AC Power Input
Each power supply has an IEC320-C14 receptacle provided at the rear of the server. An
appropriately sized power cord and AC main should be used. See Chapter 4 for system voltage,
frequency and current draw specifications.
Figure 19: AC Power Input Connector
5.3.11.1
AC Power Cord Specification
The AC power cord supplied with the SPSH4 server system is the North American type. AC
power cords must be rated for 100-240VAC voltage range, and have a low line current rating of
at least 10A.
The wall outlet end of the AC power cord must be terminated in a grounding-type male plug
designed for use in your region. The plug must have certification marks showing certification by
an agency acceptable in your region.
The server end of the AC power cord must be an IEC 320, sheet C13, type female connector.
The AC power cord must be less than 4.5 meters (14.76 feet) long, and must be flexible
(harmonized) cord or VDE-certified cordage to comply with server's safety certifications. The
diameter of the AC power cord should be less the 0.25” to use the power supply module strain
relief feature.
Summary of Contents for SPSH4 - Server Platform - 0 MB RAM
Page 12: ......
Page 112: ......
Page 116: ...Glossary SPSH4 Server System External Product Specification Revision 1 11 IV...