Product Regulatory Compliance SpecificationsSPSH4 Server System External Product Specification
Revision
1.11
94
Emission Compliance
•
FCC, Class A Verification (USA/Canada)
•
CE Declaration of Conformity (Europe)– EU EMC Directive 89/336/EEC
•
EN55022
•
EN55024
•
EN61000-3-2 & -3-3
•
CCIB EMC (China)
•
C-Tick (Australia) – AS/NZS 3548
9.6 Regulatory Compliance Notices, Statements and Information
This equipment has been tested and found to comply with the limits for a Class A digital device.
These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference, in which case the user
will be required to correct the interference at their own expense.
9.6.1
USA FCC Verification Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
For questions related to the EMC performance of this product, contact:
Intel
Corporation
5200 N.E. Elam Young Parkway
Hillsboro, OR 97124
1-800-628-8686
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and the receiver.
•
Connect the equipment to an outlet on a circuit other than the one to which the receiver
is connected.
Summary of Contents for SPSH4 - Server Platform - 0 MB RAM
Page 12: ......
Page 112: ......
Page 116: ...Glossary SPSH4 Server System External Product Specification Revision 1 11 IV...
