Intel SMALL BUSINESS SERVER Manual Download Page 18

Page: 18 / 79

- 18 -

Making Hot Swap Backplane Connections

Attach SCSI cable to the RAID controller and to the hot swap backplane.

Connect P7 and P9 power connectors to the two power cable connectors on the backplane.

Connect IPMB connector on hot swap backplane to HSBP A connector (A) on the
mainboard using 4-wire cable with I2C (or IPMB) sticker provided within hot swap drive
cage box.

Installing Hard Drives

Hard drives within hot swap cage are numbered 0 thru 5 from top to bottom. You need to populate
the top three hard drive slots from 0 thru 2.

To install each hard drive follow steps 1 thru 5 on pages 33-34 of

Drive Cage Upgrade Kit

Installation Guide

included with the hot swap drive cage.

NOTE:

Leave drive carriers with filler plates installed in unused slots 3-5. Leaving the slots empty may

result in hard drive cooling problems.

Completing Hardware Integration

Follow steps 14, 16, 17, 19, 20 as described in chassis

Quick Start User’s Guide

Summary of Contents for SMALL BUSINESS SERVER
















































































Search results

Summary of Contents for SMALL BUSINESS SERVER

Reviews:

Related manuals for SMALL BUSINESS SERVER

Brands by name

Popular brands

Intel SMALL BUSINESS SERVER, Manual

Search results

Summary of Contents for SMALL BUSINESS SERVER

Reviews:

Related manuals for SMALL BUSINESS SERVER

Brands by name

Popular brands