Intel SE7221BK1-E - Server Board - Mainboard Technical Manual Download Page 9

Page: 9 / 105

SE7221BK1-E Technical Product Specification

Table 33. 9-pin Header Serial B Port Pin-out (J1B1) ................................................................. 36

Table 34. Keyboard and Mouse PS/2 Connectors Pin-out (KM9A1) ......................................... 37

Table 35. Three-pin Fan Headers Pin-out (JP5J1, JP5J2, JP7A1, JP6A1) ............................... 37

Table 36. Eight-pin Fan Header Pin-out (J6J1, J6J2, J6J3, and J6J4)...................................... 37

Table 37. Intrusion Cable Connector (J1A1)Pin-Out ................................................................. 38

Table 38. HDD LED Header (J1E1) Pin-Out.............................................................................. 38

Table 39. HDD LED Header (J1E1) Pin-Out.............................................................................. 38

Table 40. System Recovery and Update Jumper Options ......................................................... 39

Table 41. BIOS Setup Keyboard Command Bar Options .......................................................... 40

Table 42. BIOS Setup, Main Menu Options ............................................................................... 42

Table 43. BIOS Setup, Advanced Menu Options....................................................................... 42

Table 44. BIOS Setup, Processor configuration sub-menu options........................................... 43

Table 45. BIOS Setup IDE Configuration Menu Options ............................................................ 43

Table 46. BIOS Setup, IDE Device Configuration Sub-menu Selections .................................. 45

Table 47. BIOS Setup, Floppy Configuration Sub-menu Selections.......................................... 46

Table 48. BIOS Setup, Super I/O Configuration Sub-menu....................................................... 46

Table 49. BIOS Setup, USB Configuration Sub-menu Selections .............................................. 46

Table 50. BIOS Setup, USB Mass Storage Device Configuration Sub-menu Selections .......... 47

Table 51. BIOS Setup, PCI Configuration Sub-menu Selections .............................................. 47

Table 52. BIOS Setup, Memory Configuration Sub-menu Selections........................................ 48

Table 53. BIOS Setup, Boot Menu Selections ........................................................................... 49

Table 54. BIOS Setup, Boot Settings Configuration Sub-menu Selections ............................... 49

Table 55. BIOS Setup, Boot Device Priority Sub-menu Selections ........................................... 50

Table 56. BIOS Setup, Hard Disk Drive Sub-Menu Selections.................................................. 50

Table 57. BIOS Setup, Removable Drives Sub-menu Selections.............................................. 50

Table 58. BIOS Setup, ATAPI CDROM Drives Sub-menu Selections....................................... 50

Table 59. BIOS Setup, ATAPI CDROM Drives Sub-menu Selections....................................... 51

Table 60. BIOS Setup, ATAPI CDROM Drives Sub-menu Selections....................................... 51

Table 61. BIOS Setup, ATAPI CDROM Drives Sub-menu Selections....................................... 52

Table 62. BIOS Setup, ATAPI CDROM Drives Sub-menu Selections....................................... 52

Table 63. BIOS Setup, Security Menu Options.......................................................................... 53

Table 64. BIOS Setup, Server Menu Selections ........................................................................ 54

Table 65. BIOS Setup, System Management Sub-menu Selections .......................................... 55

Table 66. BIOS Setup Serial Console Features Sub-menu Selections ..................................... 56

Table 67. BIOS Setup, Event Log Configuration Sub-menu Selections .................................... 56

Summary of Contents for SE7221BK1-E - Server Board - Mainboard










































































































Search results

Summary of Contents for SE7221BK1-E - Server Board - Mainboard

Reviews:

Brands by name

Popular brands

Intel SE7221BK1-E - Server Board - Mainboard, Technical Manual

Search results

Summary of Contents for SE7221BK1-E - Server Board - Mainboard

Reviews:

Brands by name

Popular brands