Intel SE7221BK1-E - Server Board - Mainboard Technical Manual Download

Page: 62 / 105

SE7221BK1

-E

Technical Product Specification

9.5.3.1

Boot settings configuration sub-menu selections

Table 54. BIOS Setup, Boot Settings Configuration Sub-menu Selections

Feature

Options

Help Text

Description

Quick Boot

Disabled

Enabled

Allows BIOS to skip certain tests while booting. This
will decrease the time needed to boot the system.

Quiet Boot

Disabled

Enabled

Disabled: Displays normal POST messages.

Enabled: Displays OEM Logo instead of POST
messages.

Bootup Num-Lock

Off

Select power-on state for numlock.

PS/2 Mouse Support

Disabled

Enabled

Auto

Select support for PS/2 mouse.

POST Error Pause

Disabled

Enabled

If enabled, the system will wait for user intervention
on critical POST errors. If disabled, the system will
boot with no intervention, if possible.

Hit <F2> Message Display

Disabled

Enabled

Displays "Press <F2> to run Setup" in POST.

Scan User Flash Area

Disabled

Enabled

Allows BIOS to scan the Flash ROM for user
binaries.

9.5.3.2

Boot device priority sub-menu selections

Table 55. BIOS Setup, Boot Device Priority Sub-menu Selections

Feature

Options

Help Text

Description

1st Boot Device

Varies

Specifies the boot sequence from the
available devices.

A device enclosed in parenthesis has
been disabled in the corresponding type
menu.

Number of entries will vary based on
system configuration.

nth Boot Device

Varies

Specifies the boot sequence from the
available devices.

A device enclosed in parenthesis has
been disabled in the corresponding type
menu.

9.5.3.2.1

Hard disk drive sub-menu selections

Table 56. BIOS Setup, Hard Disk Drive Sub-Menu Selections

Feature

Options

Help Text

Description

1st Drive

Varies

Specifies the boot sequence from the available
devices.

Varies based on system configuration.

nth Drive

Varies

Specifies the boot sequence from the available
devices.

Varies based on system configuration.

Summary of Contents for SE7221BK1-E - Server Board - Mainboard










































































































Search results

Summary of Contents for SE7221BK1-E - Server Board - Mainboard

Reviews:

Related manuals for SE7221BK1-E - Server Board - Mainboard

Brands by name

Popular brands

Intel SE7221BK1-E - Server Board - Mainboard, Technical Manual

Search results

Summary of Contents for SE7221BK1-E - Server Board - Mainboard

Reviews:

Related manuals for SE7221BK1-E - Server Board - Mainboard

Brands by name

Popular brands