Intel SE7221BK1-E - Server Board - Mainboard, Technical Manual

Page: 22 / 105

SE7221BK1 -E Technical Product Specification
10
interfaces that can be independently configured to operate in PCI (33 or 66 MHz), PCI-X
Mode1 (66,100,133), for either 32 or 64 bits.
4.1.1 GMCH Memory Architecture Overview
The GMCH supports a 72-bit wide memory sub-system that can support a maximum of 4 GB of
DDR2 memory using 1 GB DIMMs. This configuration needs external registers for buffering the
memory address and control signals. The four chip selects are registered inside the GMCH and
need no external registers for chip selects.
The memory interface runs at 400/533MT/s. The memory interface supports a 72-bit wide
memory array. It uses seventeen address lines (BA [2:0] and MA [13:0]) and supports 256 Mb,
512 Mb, 1 Gb DRAM densities. The DDR DIMM interface supports memory scrubbing, single-bit
error correction, and multiple bit error detection and Intel® x4 SDDC with x4 DIMMs.
4.1.1.1 DDR2 Configurations
The DDR2 interface supports up to 4 GB of main memory and supports single- and double-
density DIMMs. The DDR2 can be any industry-standard DDR2. The following table shows the
DDR2 DIMM technology supported.
Table 4. Supported DDR2 modules
DDR2-400 and DDR2-533 Un-buffered
SDRAM Module Matrix
DIMM
Capacity
DIMM
Organization
SDRAM
Density
SDRAM
Organization # SDRAM
Devices/rows/Banks # Address bits
rows/Banks/column
256MB 32M x 72 256Mbit 32M x 8 9 /1 / 4 13 / 2 / 10
512MB 64M x 72 256Mbit 32M x 8 18 / 2 / 4 13 / 2 / 10
512MB 64M x 72 512Mbit 64M x 8 9 / 1 / 4 14 / 2 / 10
1GB 128M x 72 512Mbit 64M x 8 18 / 2 / 4 14 / 2 / 10
1GB 128M x 72 1Gbit 128M x 8 9 / 1 / 8 14 / 3 / 10
4.1.2 Graphics Memory Controller Hub (GMCH)
The GMCH is a 1210-ball FC-BGA device and uses the proven components of previous
generations like the Intel® Pentium® 4 processor bus interface unit, the hub interface unit, and
the DDR2 memory interface unit. In addition, the GMCH incorporates an integrated high
performance graphics media accelerator and a PCI Express* interface.
The PCI Express*
interface allows the GMCH to directly interface with the PCI Express* devices (like PXH/PXHD).
The GMCH also increases the main memory interface bandwidth and maximum memory
configuration with a 72-bit wide memory interface.
The GMCH integrates the following main functions:
ƒ
An integrated high performance main memory subsystem.