manualshive.com logo in svg

Intel SE7210TP1, User Manual

Share
Download
Intel SE7210TP1 User Manual Download Page 45

Troubleshooting 

Devices are not Recognized under Device Manager (Windows* 
Operating System) 

The Windows* operating systems do not include all of the drivers for the Intel® chipsets, onboard 
NICs, and other components. See “

Additional Information and Software

” for a link to the current 

drivers and chipset files. 

Hard Drive(s) are not Recognized 

Check the following: 

‰

 

Make sure the drive is not disabled in BIOS Setup. 

‰

 

Make sure the drive is connected correctly and that is plugged into the power supply.  

‰

 

Make sure the drive is compatible. See “

Additional Information and Software

” for a link to the 

tested drives. 

‰

 

Make sure you have not exceeded the power budget for the server. See “

Additional Information 

and Software

” for a link to software to check your power budget. 

‰

 

If using SCSI drives, verify that each SCSI ID number is unique on the SCSI bus.  See your 
drive documentation for details on setting the SCSI ID for your drives. 

‰

 

If using ATA drives, verify that the master/slave settings are set correctly.  See your drive 
documentation for details on setting the master/slave settings. 

‰

 

If using a RAID configuration with SCSI or SATA drives, make sure the RAID card is installed 
correctly. 

Bootable CD-ROM Is Not Detected 

Check the following: 

‰

 

Make sure the BIOS is configured to allow the CD-ROM to be the first bootable device. 

 

Intel Server Board SE7320SP2 / SE7525GP2 User Guide 

45 

Summary of Contents for SE7210TP1





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands