Clearing the Password
If the user or administrator password(s) is lost or forgotten, moving the password clear jumper into
the “clear” position clears both passwords. The password clear jumper must be restored to its
original position before a new password(s) can be set. The password clear jumper is located on
jumper block J17.
1.
Power down the system and disconnect the AC power.
2.
Open the server chassis.
3.
Move the jumper from pins 5 and 6 to the Clear Password position, covering pins 6 and 7.
4.
Reconnect the AC power, power up the system.
5.
Power down the system and disconnect the AC power.
6.
Return the Password Clear jumper to the original location, covering pins 5 and 6.
7.
Close the server chassis.
Intel Server Board SE7320SP2 / SE7525GP2 User Guide
36
