2
Server Board Installations and Upgrades
Before You Begin
Before working with your server product, pay close attention to the Safety Information at the
beginning of this manual.
Tools and Supplies Needed
Phillips
*
(cross head) screwdriver (#1 bit and #2 bit)
Needle nosed pliers
Antistatic wrist strap and conductive foam pad
Installing and Removing Memory
The silkscreen on the board for the DIMMs displays DIMM1B, DIMM1A, DIMM2B, and
DIMM2A, starting from the inside of the board. DIMM2A is the socket closest to the processor
socket. For DIMM population rules, see “
Memory.
”
Installing DIMMs
To install DIMMs, follow these steps:
1.
Observe the safety and ESD precautions at the beginning of this book. See “
Safety
Information
.”
2.
Turn off all peripheral devices connected to the server. Turn off the server.
3.
Disconnect the AC power cord.
4.
Remove the server’s cover. See your chassis documentation for instructions.
5.
Locate the DIMM sockets. See Figure 6.
Intel Server Board SE7320SP2 / SE7525GP2 User Guide
23
