Intel SC5650-DP, Service Manual

Page: 92 / 174

Hot Swap Drive Cage Upgrade Install Instructions (optional)
74 Intel
®
Server Chassis SC5650-DP/WS/BRP/UP Service Guide
c. If you are installing a SAS/SATA hot swap backplane with expander:
Warning: SATA controllers cannot be used with an expander backplane.
i. Connect the two power cables (see letter “A” in the following figure) to the
power cable connectors on the SAS/SATA backplane.
ii. Connect an SAS/SATA data cable (see letter “B”) to each appropriate SAS/
SATA connector on the SAS/SATA backplane.
iii. Connect the IPMB cable (see letter “C”).
iv. Connect the fan power to the server board. For other Intel
®
server boards, refer
to the Quick Start User’s Guide that came with the server board.
Figure 89. Making Six-drive Hot Swap Drive Cage Backplane with Expander
Connections (DP/WS/BRP configuration shown - fan bracket not shown in the
illustration for clarity)
18. Install the hot swap hard drives.
19. Install the front bezel assembly. For instructions, see “Installing the Front Bezel
Assembly” .
20. Install the left side cover. For instructions, see “Installing the Left Side Cover” .
21. Plug all peripheral devices and the AC power cable into the server.
6-Drive Expander HS
Backplane
A
C
B
SAS 0
SAS 1
AF00448